Microsoft Windows:
Windows users should not need to install any drivers. Drivers self-install on all Windows platforms. These drivers are for rare use on legacy Windows platforms only.
Please contact us before using these drivers.
CAC Card Reader SOLBERG-TIMOTHYA138_. Below Security Modules and Devices you will see CAC. Most Visited— Getting Started Latest Headlines Apple Wikipedia USAF — Apple— MAC— iPhone DOD - DOD CAC- Mactopia- Entourage Portal AF Portal - Home AF PORTAL. Defense officials for voters to recognize the military's focus on preserving the.
- By MobileGeek| August 1st, 2016| Mobile CAC Reader| Comments Off on Saicoo® DOD Military USB Common Access CAC Smart Card Reader, compatible with Mac OS, Win – Vertical version Read More Saicoo® DOD Military USB Common Access CAC Smart Card Reader, compatible with Windows (32/64bit) XP/Vista/ 7/8/10, Mac OS X.
- The IOGEAR GSR202 is a TAA compliant USB Common Access Card Reader for military, government and even private sector workers who need everyday access to secure systems. Common Access Card (CAC) or Smart Card readers are used as a communications medium between the Smart Card and a host (e.g.
- USB Smart Card Reader, Rocketek DOD Military USB CAC Memory Card Reader Compatible with Windows, Linux/Unix, MacOS X - Build in SDHC/SDXC/SD Card Reader and Micro SD Card Reader.
- This subreddit is geared toward the United States Army, but all are welcome to join regardless of military service. Weekly Question Thread (N00b thread) For all of your joining and reclassing needs.
- The IOGEAR GSR202 is a TAA compliant USB Common Access Card Reader for military, government and even private sector workers who need everyday access to secure systems. Common Access Card (CAC) or Smart Card readers are used as a communications medium between the Smart Card and a host (e.g.
SGT111/SGT114/SGT116/SGT117/SGT118/SGT119/SGT121/SGT122 Windows 98/2000 Drivers (.zip 2.0MB)
SGT111/SGT114/SGT116/SGT117/SGT118/SGT119/SGT121/SGT122 CCID Drivers (.zip 4.5MB)
To determine if your reader has properly self-installed on a Windows workstation, go to Windows Device Manager (right-click on Computer (This PC in Windows 8/10), select Properties and select Device Manager).You should see a list of devices similar to the list below.There should be a category entitled Smart card readers and if you click on it, it should show a device named Microsoft Usbccid Smartcard Reader (WUDF) or similar.
Macintosh Installer (.pkg driver) for Mac OS X 10.7 or earlier
Mac OS Installer (.zip 6KB) (updated 7/29/11)
Note to Mac OS: No driver is required for SGT111-7, SGT111-8, SGT111-8c, SGT117XE-3, SGT117XE-4, SGT118-6, SGT118-6c, SGT119XM-4, SGTiall-2 and SGTiall-2c
OS X will self-install an EMV Smart Card reader driver automatically. To determine if these readers are properly installed go to:
Macintosh Installer for older SGT smart card readers (.dmg Disk Image File) for Mac OS X 10.8, 10.9, 10.10, 10.11, 10.12, 10.13 (Mountain Lion, Mavericks OS, Yosemite OS, El Capitan, Sierra. High Sierra)
Mac OS Installer (OS X Disk Image File 226KB) (updated 1/3/15)
For OS X versions 10.11 and newer. You may have to turn SIP off to install driver:
1. Boot into recovery mode (CMD+R) before Apple Icon shows up.
2. Open terminal from the menu -> utilities.
3. Run command csrutil disable.
4. Run command reboot to restart.
5. Install driver normally
DOD and US Govt Macintosh users please reference http://militarycac.com/apple.htm for additional install procedures
Linux Users:
Also see: http://pcsclite.alioth.debian.org/ccid.html
Note to DOD CAC/PIV Users:
The above software and the software included on your CD is not required nor recommended for DOD CAC use. Consult your Command's IT Officer.
Android Users:
The SGT111-7, SGT111-8, SGT111-8c, SGT117XE-3, SGT117XE-4, SGT118-6, SGT118-6c, SGT119XM-4, SGTiall-2 and SGTiall-2c self-install and are compatible with Android versions 5 and newer. No drivers are required.
We support:
6 'high level' steps needed, follow down the page to make this a painless systematic process
Step 1: Your CAC reader must be Mac friendly
Visit the USB Readers page to verify the CAC reader you have is Mac friendly
'Some, not all' CAC readers may need to have a small program installed to make it work.
NOTE: Readers such as: SCR-331, GSR-202, GSR-202V, & GSR-203 could need firmware updates (NO OTHER Readers need firmware updates).
Information about these readers are in Step 2
Step 2: The Mac must be able to 'see' the reader
Plug the CAC reader into an available USB port before proceeding, give it a few moments to install
Step 2a: Click the Apple Icon in the upper left corner of the desktop, select 'About This Mac'
Step 2b: Click the 'More Info' (button)
Step 2c: Click 'System Report...' (button) (Only available in 10.7.x and above; 10.6.x and earlier will not see this window)
Step 2d: Make sure the CAC reader shows in Hardware, USB, under USB Device Tree (See image below). Different readers will show differently, most readers have no problem in this step. See Step 2d1 for specific reader issues.
Step 2d1: Verify firmware version on your SCR-331 or GSR-202, 202V, or 203 CAC reader. If you have a reader other than these 4, GO TO STEP 3
Step 2d1a-SCR-331 reader
If your reader does not look this this, go to the next step.
Below 'Hardware' click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCRx31 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 5.18, you need to update your firmware to 5.25. If you are already at 5.18 or 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.
Step 2d1b-IOGear GSR-202, 202V, and 203 readers
If your reader does not look like these, go toStep 3.
Below 'Hardware' click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. You should see “EMV Smartcard Reader.” If the Smart Card Reader is present look for 'Product ID' in the lower right corner of this box: If you see: 0x9540, you need to downgrade the firmware to 0x9520. If you see 0x9520, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.
Step 3: Verify which version of OS X is installed on your computer
(You need to know this information for step 6)
Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac'
Step 3b: Look below Mac OS X for: Version 10.X.X.
Step 4: Verify which exact CAC (ID Card) you have
(You need to know this information for step 6)
Look at the back of your ID card (above the black strip) for these card types. If you have any other version than the four shown below, you need to visit an ID card office and have it replaced. All CACs [other than these four] were supposed to be replaced prior to 1 October 2012.
| GEMALTO TOP DL GX4 144 | GEMALTO DLGX4-A 144 |
| Oberthur ID one 128 v5.5 Dual | G&D FIPS 201 SCE 3.2 |
Find out how to flip card over video
Step 5: Decide which CAC enabler you can / want to use
After installing the CAC enabler, restart the computer and go to a CAC enabled website
Optional Step 6: Update your DoD certificates:
Step 6a. Load the DoD Intermediate certificates into your keychain
Apple
then...
Step 6b. If your CAC has a CA between 27 and 32 [and they didn't show up after 5a above] you'll need toinstall all of the CA 27 to 32 and CA Email 27 to 32 certificates manually. You can download the AllCerts.zip (http://militarycac.com/files/maccerts/AllCerts.zip) file, then double click each certificate individually to have them install into the login section of keychain. If you want to verify they are there, follow guidance on the Keychain page. Idea # 2 only.
If you receive Error: 100013, click here for instructions
Military Cac Card Reader Software For Mac
Mac support provided by: Michael Danberry